Jacketed Glass Reaction Tank has a stirring system, condensation, drip addition, reflux, and collection system. The inner layer is equipped with motor and stirrer for stirring reactions, the jacket is circulated through a cold and/or heat source to provide high-temperature reactions (up to 300 ℃) or low-temperature reactions (up to -80 ℃).
The elevation mechanism of Jacketed Glass Reaction Tank to be able to move the tank up, down, and tilting, convenient for dumping and cleaning.
Vacuum also can be applied if required (we will provide the water-ring vacuum pump). The solvent vapor is cooled in the glass condensation coil (cooling device needs to be connected) and becoming liquid condensate for re-fluxing into the reactor or be recovered through the valve at the lower part of the receiving bow.
After the reaction is completed, the material can be discharged from the side discharge port at the bottom of the pot. It is an ideal experimental pilot equipment for modern bio-pharmaceuticals, fine chemicals, and new material synthesis.
Features of Jacketed Glass Reaction Tank
- Jacketed Glass Reaction Tank comes with a square steel spray coating and 304 stainless steel frame structure, compact, sturdy, non-conformable, corrosion-resistant, and easy to move.
- The parts in contact with the materials are all made of high borosilicate glass (with a coefficient of expansion of 3.3) and polytetrafluoroethylene materials, which have stable performance and are not easy to react with the materials.
- The VFD allows you to operate at high and low speeds in practice, with ideal accuracy and ease. It can be equipped with a fully explosion-proof system, dual display explosion-proof box digital display of speed and material temperature inside the kettle, stable performance, clear display of control and data plane, simple and easy to operate.
- The mixing system adopts ceramic bearings and mechanical seals to prevent wear and debris from the mixing rod. It is resistant to high temperature, wear-resistant, and has a good sealing effect.
- Adopting PT100 temperature sensor and glass thermometer sleeve.
- The kettle body can be lifted up and down, either electrically or manually with a hand-wheel. The kettle body can rotate 360 degrees for easy discharge and cleaning. The kettle cover can be customized with PTFE.
- The vacuum pressure gauge displays real-time vacuum and the pointer displays.
- Crescent type stirring blade, 304 stainless steel+PTFE stirring blade; The material of the mixing rod is 304 stainless steel. Outsourced PTFE pipes have high strength and strong corrosion resistance.
- Glass+PTFE discharge valve, no liquid accumulation side discharge, very fast solution recovery.
- There is a Fuma wheel with brakes at the bottom of the machine, which can move as a whole and is easy to operate.
- The circulation inlet and outlet of the kettle body are equipped with buffering devices, and the pipeline is made of stainless-steel hoses, covered with foam silicone for insulation. After fixing the pipe bracket, it is connected to external equipment to reduce the pressure at the inlet and outlet, avoiding the situation where the kettle body is fragile when moving or replacing the connecting equipment in the later stage.
